Products
Reflectobit
Reflectobit
Aluminium solar reflective paint
A thin, bituminous based aluminium protective coating of brushing consistency that dries to a silvery finish.
Reflectobit is a light/heat reflective coating that will provide protection against solar degradation and heat gain. It is suitable for use over bituminous coatings, aged asphalt and primed steel. It is not suitable for direct application to expanded polystyrene.
Directions for use
All surfaces must be structurally sound, clean, dry and free from surface contaminants such as grease, rust and dirt.
Stir very thoroughly before use!
Apply by brush or mohair roller. When brushing, use soft bristle brushes applying the lightest of pressure. Apply 2 coats, the second coat being applied as soon as thefirsrt coat is dry. Do not apply when rain, frost or overnight dew are expected before the coating is fully dry, as bronzing of the surface may result if these conditions are not observed. When applying to large areas on bright days it is advisable to wear polarized sunglasses to reduce glare.
Drying time - approximately 1 hour depending on temperature, humidity, air and base conditions.
Cleaning of tools
Clean with white spirit.
Consumption
0.20-0.30 kg/m2 / layer.
Packaging and storage
Store under cover away from sources of heat and ignition.
Keep buckets sealed when not in use.
Storage temperature should be between 5°C and 30°C!
Storage life 12 months under good storage conditions in original unopened buckets.
